6 Types of Shingles and Their Pros & Cons | Bob Vila 6 Types of Shingles and Their Pros & Cons | Sheet Metal Roofing Screws

Leveraging the hallowed relationship between readers and their morning newspaper, print continues to provide advertisers across Pakistan the opportunity to reach out and leave an impact on an engaged and loyal readership. 

Widespread fastener use has benefited in modern times from standardization focused on preventing misuse and encouraging compatibility. Organizations such as the Industrial Fastener Institute and federal legislation like the Fastener Quality Act have worked to promote stringent and wide-ranging standards for fasteners of all kinds. Nails, screws, bolts, clamps, rivets and other fasteners are all governed by these standards, allowing manufacturers, engineers, wood-workers and others to produce materials that can work using these regulated measurements and compositions. Nails and screws, possibly the most commonly used fasteners, both benefit from standardization tables, but the uninitiated might have trouble determining what sizes are good for their projects.

In all this, Lever has had the support of Lintas, now R-Lintas. This was originally the advertising arm of Unilever in countries where advertising was not developed. Over the years, Unilever began to dispose of these agencies. R-Lintas was bought by C.A. Rauf, a former Lever man. He was licensed to use the name, subject to Unilever conditions. 

• Monitor and protect the Services, including research and analytics regarding how the Services are accessed, used, or performing;

WP SHOCK SETTINGSThe rear shock has a stiffer initial feel compared to last year, making the setting in the ballpark for just about all of our test riders. After we set the sag at 105mm, most riders didn’t change a thing. For hardcore racing, we recommend this shock setup for the 2018 Husky TC125 (stock specs are in parentheses):Spring rate: 42 N/mRace sag: 105mmHi-compression: 2 turns outLo-compression: 15 turns outRebound: 15 turns outNotes: The stock shock settings are in the ballpark. The majority of MXA test riders made no adjustments other than sag adjustments for their weight. This shock may not be up to Kayaba YZ125 shock standards yet, but it is closing the gap each year.

Since the early forties, Lever had been looking for a site that could manufacture and supply vanaspati to the Northwest. Two local players appeared on the scene, equipped with political clout. Sir Maratab Ali, the force behind the Ali Group and William Roberts, a locally-based British landlord with vast cotton holdings. The two gentlemen were offered generous concessions by the Nawab of Bahawalpur, including the grant of a large tract of land in Rahimyar Khan, access to canal water, attractive tax holidays and other perks.

The Ego battery I mounted on the non-drive side to counter the weight from the motor on the left side

Anyone in the embedded systems biz who’s ever gone to a trade show probably knows the "brick in the box" technique.

“You can’t drive these screws in spots where you have close vertical restrictions,” says Baeumler.

There are too many differentiations to enumerate them all here, but the basic system of ISO measurement is as follows: Because ISO thread standards are metric, they are demarcated as M followed by the nominal diameter, in millimeters. If the pitch of the thread is nonstandard, this diameter is followed by an “x” and the pitch. If a standard pitch is used, no pitch is mentioned.

In 1983, it touched Rs 423 million (Marketing Review) and by the end of 2017, the figure amounted to Rs 87.7 billion (Aurora Fact File), representing a staggering increase of 20,632% since 1983. Superheroes indeed!

Now, since every story has to begin somewhere, I will start with the first day I walked into Interflow. I was a copywriter working at Asiatic (now JWT), pampered and feted by the Rammals, happy and even more importantly, content. Yet here I was, entering the lair of the ‘enemy’, the closest thing that you could find to the big, bad wolf in the advertising industry of Pakistan at that point in time.