DeWalt DCF622 20V Max XR Versa-Clutch Screwgun | Flat Torx Self Drilling Screw

With the slow migration of communication standards from serial-based to Ethernet-based devices, the Advanced/Industrial Modbus Gateways address responsiveness with a data concentrator function. It automatically continues to poll intelligent electronic devices (IEDs) at a specified interval and store the data in its internal memory waiting for master device requests.

TCB series counterboring tool diameters range from 26mm to 59mm (1.02" to 2.32"), and inserts with the –CG style chipbreaker geometry yield consistent chip flow in various materials at a range of cutting depths.

The other trap is the numbering system changes. Bolts of 1/4 inch and above are simply numbered by their size ie 1/4 inch bolt.

This trend is fuelled by a generation with a passion for creating stories that relate to the modern Pakistani cinema-goer, hungry for localised content, at the swanky new multiplexes mushrooming across the urban centres.

Honestly the different types of screwdriver heads confuse the hell out of me. I mean I know what they all look like but I have no idea what they are actually called. Always a huge head ache

The trucks have a more sophisticated aesthetic than one is immediately aware of. Regional styles have evolved: Peshawar trucks are formally restrained with greater emphasis on the older style of Victorian lettering and cameo images placed two-thirds down the panel. High-bodied Rawalpindi trucks have every available space covered with intricate layering of coloured plastic filigree designs. Karachi trucks, followed by Lahore, still have the most painted imagery. A truck has to be seen at night on unlit highways, with its excess of reflectors and florescent stickers, to be truly appreciated.

Just on a point of information, the "PR drone" was actually Jen-Hsun Huang, company president and CEO. If the card he was waving around was a mockup, he surely knew about it.

4.8 By providing us with your telephone number, you are authorizing us, our service providers and our and their affiliated companies to deliver or cause to be delivered SMS text messages, texts, push notifications and voice message notifications, including promotional messages, using an automatic telephone dialing system. You are not required to receive such messages as a condition of purchasing any property, goods or services. Registered users may choose not to receive text messages from us by not providing us their cell phone number. You can also cancel the SMS service at any time by replying ‘STOP’ via text. Please note that standard message rates and data charges from your cellular service provider apply to sending and/or receiving text messages. You are solely responsible for such message rates and data charges.

There was a time when every client had one agency. This was when product differentiation did not matter.

The most common design challenge on the threaded end of a bolted joint is determining the required thread engagement when using tapped holes. As with nuts, the objective is to ensure that the failure mode in the event of overtightening is by bolt fracture rather than thread strip. This mode is preferable, because it is more obvious (stripped threads don’t generate a loose bolt) and repair is generally less expensive and more dependable.

Since when do "generic wood screws" come chromed and without a tapered head? Has the author actually seen a generic wood screw before?

The early cinema posters were printed as lithographs in single or two-colour. When technology grew in the sixties, these became of a better quality with four-colour printing. From the mid-eighties, pasted photographs were embedded into hand-painted artwork before completely succumbing to digital prints. Now it is difficult to distinguish an ordinary advertisement poster from a film poster. No more stars are ‘made’ by poster artists; they simply remain actors.