DIY dome homes built from AirCrete are an affordable & ecofriendly option | Flat Torx Self Drilling Screw

WP FORK SETTINGSOut with the old and in with the new. WP AER air forks are here to stay. As a general rule, first find an air pressure that you like. Then, start adjusting the clickers. We recommend adjusting the air pressure in 2-pound increments. While the stock air pressure is 147 psi, we had riders who liked it as low 143 psi and as high as 154 psi. With only one air-pressure adjustment, changes can be made in half the time it takes to adjust a Showa or Kayaba air fork. Plus, KTM gives you a digital air pump when you buy the bike. It makes it easier to find your happy place. These are the settings we ran on the 2018 KTM 250SX (stock settings in parentheses):

It was the mid-eighties in Riyadh. Most kids my age were out playing cricket, but I was busy hacking into a computer game called King’s Quest by Sierra. The official versions of computer games were not available in Saudi Arabia; consequently, the usual hints and support were always missing. If you got stuck, you either waited until you, or someone else, figured the way out.

The storytelling was about how each character was faced by a problem and was searching for a way (medium) to solve it; the subtlety lay in the fact that Dawn was never mentioned as the solution – each character reaching out to the ‘medium’ that gave them the most satisfaction (for example Aibak goes off to ride his polo ponies, while Anarkali picks up her paint brush).The choice of the miniature style was also very Dawn. Miniature paintings in their heydays were considered a form of communication (as is all art); it is also a vanishing one, which Dawn pays tribute to.

Keep in mind that the required thickness of the foam is determined by the building code and climate zone (see section and table R806.5 in the 2015 IRC). If the foam isn’t thick enough in proportion to the interior insulation, the assembly is at risk of moisture accumulation—sometimes at high risk. It’s the proportion of exterior R-value to total R-value that’s important. More insulation on the exterior is good; less is bad.

A: Yes. Thank goodness. It was a nightmare last year trying to sort out the jetting. This year it is in the ballpark. It’s not perfect, but it’s much closer. We went one size richer on the main jet (490) and Husky went two sizes richer on the pilot (35). We still believe that the Mikuni TMX 38mm carburetor is inferior to the Keihin PWK carburetor, which was less temperamental and ran cleaner throughout the range. Although, when we think back a few years, the Keihin had its teething issues too. Husqvarna did not switch from Keihin to Mikuni for a performance boost. Although Husky, KTM and Keihin have been mum on why the carbs were changed, we assume that it was a production capability issue at Keihin’s factory or a significant price difference between Keihin and Mikuni, or maybe a little of both. Whatever caused Carb-Gate, we miss the no-hassle Keihin.

In 1946, when the war was over, delegates from 25 countries met at London’s Institute of Civil Engineers. The city was still reeling from bombing and rationing, and Willy Kuert, who had traveled from Switzerland for the meeting, recalled a city that was “still partly destroyed.” In the wake of this international conflict, the delegates sought an organization that prioritized international cooperation. “We went to London, we Swiss, hoping to create a new organization which would do the work of standardization in a democratic way, and not cost too much money,” Kuert wrote in the ISO’s self-published history, Friendship Among Equals. “At the end of the London conference, we had the feeling that new statutes and new rules would permit us to do such work. Real, effective work.”

Yeah, I never saw wood screws with a rounded head on them like that. Not to mention chrom dipped. I mean, if you were going to go to the trouble of chrome dipping some wood screws you sanded down to look like machine screws, you really have to be diabolical in all the wrong ways.

Very briefly did Aisam-ul-Haq provide a welcome distraction and Close-Up seized upon his winsome smile, but tennis is not a game that is played by everyone and Haq, though very sweet, was not sexy enough. Cricket still makes our hearts go zing.

“The MiTek ProSeries offers a one-stop source for high-strength fasteners used in a wide range of applications, from attaching structural connectors and fastening components, to building decks and other carpentry tasks,” said Brent Kreutzer, MiTek’s Product Manager for fasteners, anchoring solutions, and tools.

At the time of its inception and soon independence, HBL’s communication focused on introducing the benefits of banking to the public. The communication was aimed at promoting its product suite in line with the economic needs of the time.

On top of all that, the spaces between the seams act as channels for air circulation, which makes your panels more effective by cooling them off during the day.

Pakistan’s ad industry has mostly been driven by legacy (and legendary) entrepreneurs. Prince Abbas Mirza (D.J. Keymer and of pre-partition heritage), Anwar Rammal, Shaukat Fancy, Naseer Haider, Javed Jabbar, the Thavers, S.H. Hashmi, C.A. Rauf, Bashir Khan and countless others. Later, Taher A. Khan, Shahnoor Ahmed, Jawaid Iqbal and Imran Mir built great advertising businesses.