EK Performance 280 and 360 Liquid Cooling Kit Review | Flat Torx Self Drilling Screw

Until 2010, outdoor was considered to be a support medium to TV and print. The artworks were a basic adaptation of print ads, with little thought going into the effectiveness of the communication.

Figure 5 extends this example of uneven clamp load by showing the pressure distribution across two cylinders (2.25 inches in diameter and 2 inches long) clamped by a ½ inch-13 screw and nut. Even at this thickness, the peak pressure is still 40 percent greater than would be predicted by dividing the bolt tension by the contact area at the joint faces.

Pakistan’s ad industry has mostly been driven by legacy (and legendary) entrepreneurs. Prince Abbas Mirza (D.J. Keymer and of pre-partition heritage), Anwar Rammal, Shaukat Fancy, Naseer Haider, Javed Jabbar, the Thavers, S.H. Hashmi, C.A. Rauf, Bashir Khan and countless others. Later, Taher A. Khan, Shahnoor Ahmed, Jawaid Iqbal and Imran Mir built great advertising businesses.

The AOR has been a prerogative of multinationals and large national clients. In Pakistan, multinationals adopt brand strategies developed at the global or regional level, with an aligned AOR. Major thematic campaigns are beginning to move in a similar direction, where the trend is towards global and regional creative.

Polyfast thread-forming screws have 45-degree asymmetrical threads, providing a narrow shank and a 26-degree point that eases installation. Photo courtesy Semblex Corp.

With PV installations increasing across the country, more unique roofing materials are questioned every day. For interlocking metal shingle roofs, finding the right mounting solution can be a puzzle. Most interlocking metal shingles have a pattern stamped onto them, and traditional roof mounts often require smooth, flat surfaces. Flashing is also difficult on interlocking metal shingles since shingles can’t be separated and flashing can’t slip underneath.

Article excerpted from ‘The business of entertainment’, published in the November-December 2014 edition of Aurora.

In the good old days, the agency was perceived as the expert on consumer behaviour, a reservoir of creativity and the shrewd negotiator making deals with different media owners on behalf of their clients. A centralised role was important to synergise at least parts of the advertising value chain.

Bourdain, known for his barbed tongue, didn’t spare his fellow celebrity chefs from his scathing commentary. Whether high-brow or low, they were all fair game to him. He slammed Food Network stars like Paula Deen, Rachael Ray and Guy Fieri and high-end chefs like Alice Waters and Alan Ducasse. Ray and Fieri later got their revenge at a raunchy roast in 2012. 

He wrote in a 2015 CNN piece that he considered naming her Beirut: "She was, after all, conceived within two hours of returning from my first visit there."

you are right in your analysis of that specific insert, that is exactly what it is meant to do. I was only using it as an example as multi point tooling is starting to get into specialty tooling. The example i provided is meant to reduce the number of passes by doing multiple cuts with one tool for a singe start thread but if you check out this milling tool:

Because of these events, the Mirror became highly controversial in the sixties. The tension between Begum Hamidullah and Ayub Khan escalated, resulting in the magazine being banned twice, and government advertisements almost completely revoked from the periodical.