Engine Upgrades – Prepackaged Power | Metric Wood Screws

WP FORK SETTINGSOut with the old and in with the new. WP AER air forks are here to stay. As a general rule, first find an air pressure that you like. Then, start adjusting the clickers. We recommend adjusting the air pressure in 2-pound increments. While the stock air pressure is 147 psi, we had riders who liked it as low 143 psi and as high as 154 psi. With only one air-pressure adjustment, changes can be made in half the time it takes to adjust a Showa or Kayaba air fork. Plus, KTM gives you a digital air pump when you buy the bike. It makes it easier to find your happy place. These are the settings we ran on the 2018 KTM 250SX (stock settings in parentheses):

All the MiTek ProSeries™ fasteners feature a “cut point” that offers a fast start – with no pre-drilling required – that helps reduce installation torque and splitting. MiTek ProSeries fasteners are listed under ICC-ES ESR-2761, and code-compliant with the latest codes (2015 IBC/IRC).

Syed Ali Hasan Naqvi on why print advertising continues to effectively deliver results in an age of new media disruptions.

We want to hear what you think about this article. Submit a letter to the editor or write to letters@theatlantic.com.

Although friction-drilling screws have been around since the late 1990s, the fasteners are increasing in popularity due to the continued emphasis on “lightweighting” in the auto industry; a greater familiarity with the technology; and advances in the equipment for installing them.

Magnesium is brittle. Thread-cutting screws are not an option, because the threads will break off. Self-clinching fasteners aren’t viable either, since the metal will not readily flow into the fasteners’ recesses. (Heating the metal prior to installation can help, however.)

These scans of pressure-sensitive film show the pressure distribution under the head of a ½-inch bolt tensioned to 5,000 pounds. Photo courtesy Peak Innovations Engineering

Roofing Metal Alliance is one of about 250 exhibitors this year at MetalCon, a three-day show that ends Friday. About 6,000 construction professionals, from designers and builders to developers and contractors, attended to network, see new products, hear lectures and take classes. Roofing and walls make up the majority of metal construction demand.

The first method is installing the valve stem in the rim and then attaching the sensor. The second method is to attach the sensor to the valve stem and then insert it into the wheel. Why? On some stems, the sensor could come in contact with the wheel as the stem is pulled with the sensor attached.

AG: The vast majority of our murals are fine. Next to the gallery there were five murals that were tagged recently and I was a bit upset about it. After a week a young kid who I knew came into the gallery and said, ‘Hey did you see what I did?’ I had to explain to him that adding graffiti to our birds was not cool. I had to tell him that there is a code on the street among street artists and taggers that you don’t touch other people’s art. He apologized, saying ‘I didn’t know that.’ There’s a much better example though. There are two black-billed magpie murals on the corner of 150th Street and Broadway. There’s a space between the murals. The space regularly gets tagged and the landlord comes and paints over it but nobody touches the birds.

Culture informs the work of marketers and it is a facet of society they can transform through their work. Take the example of recipe mix masalas. When this product category was introduced in the eighties, the reaction was negative. Women were not comfortable using such a product as they felt it suggested that they did not care enough for their family and were lazy.

Great article! The past was so open and modern and current era is that much outdated and bleak that even the public in cricket matches is "censored".