If your upstairs ceiling and wall are separating, truss lift might be the culprit | Metric Wood Screws

"It’s like there’s two separate groups of fans for both those films," he once joked. "They don’t overlap in any way, other than they are both extremely passionate." 

1.4 We reserve the right to change or update this Privacy Policy by posting such changes or updates to the Services. Amendments to this Privacy Policy will be posted at this URL and will be effective when posted. You can tell if the policy has changed by checking the last modified date that appears at the end of this Privacy Policy. Your continued use of the Services following the posting of any amendment, modification or change shall constitute your acceptance thereof.

The work people like Ali Rez are doing (and which is winning international recognition) has this phenomenon at the heart of it. This type of work needs to become an everyday practice. It will not, unless ad practitioners restore their pride in their own culture. 

Lemme throw my two cents in I guess. Slotted screwdrivers ARE called flathead screwdrivers in the Southern States in USA. I grew up in a machine shop in Houston, we modified engines, guns, instruments, and everyone in the shop would ask for a flathead if they wanted a slotted. And funny enough, we always knew the difference between a flathead screw and a flathead screwdriver. Even the buzzy old fart in the corner fine tuning his mini steam engine. Jenny’s are called pliers, and cops are called constables. SO WHAT. Learn your regional as well as your technicals, because you may need to work with a local who is very important to your project, and will not feel like investing anymore into the snotty guy who can’t even run a decent flathead.

You might be better off pulling the whole engine just to replace a head gasket in such a situation. Also, in some cases, the nuts atop the studs may interfere with the valvetrain (like rocker stands) or require some machining to clear the heads themselves. So, while a stud is always going to be the preferred fastener in a high stress application (like the cylinder heads or main bearing caps), we might not always be able to use them.

Figure 5 extends this example of uneven clamp load by showing the pressure distribution across two cylinders (2.25 inches in diameter and 2 inches long) clamped by a ½ inch-13 screw and nut. Even at this thickness, the peak pressure is still 40 percent greater than would be predicted by dividing the bolt tension by the contact area at the joint faces.

Now, since every story has to begin somewhere, I will start with the first day I walked into Interflow. I was a copywriter working at Asiatic (now JWT), pampered and feted by the Rammals, happy and even more importantly, content. Yet here I was, entering the lair of the ‘enemy’, the closest thing that you could find to the big, bad wolf in the advertising industry of Pakistan at that point in time.

As you can see, on an already-wide engine, like this Ford 5.0L Coyote, head studs can add considerable room needed to remove the heads in the engine bay. In an application such as this, a head bolt might be a better option, if the engine wasn’t coming out of the car.

We partner with third parties to deliver content that may be of interest to you, including advertisers. As described in our Privacy Policy, we allow third party partners to serve cookies or set trackers, which may result in the collection of data regarding the visitors to our websites. Data collected by these third parties is subject to the privacy policies and practices of these companies. TSM has no role in creating these policies or setting practices of third parties. You can learn more about our third party partners and their privacy practices by clicking on the links below.

OOH advertising is one of the oldest mediums, globally, as well as in Pakistan. In Pakistan, we can divide its evolution into three eras: hand-painted signage (1947-1990), large format spectaculars (1990-2010) and outdoor to out of home (2010-present).

Thread-forming screws are perhaps the most efficient means of fastening magnesium parts. These screws eliminate the cost of drilling, tapping, cleaning and inspecting holes, and they give designers more flexibility than nut-and-bolt assemblies.

Perhaps it was the minimalistic visual appeal of the pristine whites against the green backdrop; perhaps it was the appealing metaphor of Imran Khan towering over adoring fans/aspiring cricketers like a modern-day god perhaps it was the sight of him wiping the sweat off his brow with the ice-cold bottle that set a million hearts aflutter, or the peppy English jingle; maybe, it was simply the perfect match of a youthful brand (the only one at the time) and the youthful zest of sports.