Orbitkey 2.0 Review: Versatile and Stylish Key Management | Flat Torx Self Drilling Screw

One woman uses scraps of cardboard to fill the nearly 2-inch gap between the top of her front door and its frame.

From the earliest prototype version of the WP air fork, the air seal has undergone constant updates. The first version of the AER forks, which were only installed on 2016 European models, had an air seal that could not handle cold temperatures and would leak air pressure from one chamber to the other. WP changed the seal material to a more resilient and less temperature-sensitive compound. Unfortunately, that was not the perfect cure. In 2017, when the AER forks were first introduced in the American market, the lip seal was replaced with a quad-ring seal. The quad-ring solved lots of problems, but because it had four small sealing surfaces instead of one large one, repetitive wear became an issue. For 2018 the WP AER forks switched to a larger air seal to replace the 2017’s quad-ring seal. The new seal has a unique, slightly out-of-square shape that increases surface area for better sealing and longer wear.

I’m well versed at using the term “flat head” as well. I worked at a tech repair shop for a couple of years and I always heard the term flat-head. From my experience even automobile mechanics (my friends atleast) use the term flat-head as well. If I asked them to toss me a slotted screw driver I’m not even sure they would know what I mean. lol Nonetheless, good article on screwdrivers.

In 1994, the media departments of J. Walter Thompson and Ogilvy & Mather, both WPP advertising agencies, merged and formed Mindshare, the Group’s first global media agency network overseas. The idea behind it was to combine the media budgets of the agencies’ clients in order to negotiate better rates and maximise their brands’ visibility across media.

Sponsored Content is a special paid section where industry companies provide high quality, objective, non-commercial content around topics of interest to the ASSEMBLY audience. All Sponsored Content is supplied by the advertising company. Interested in participating in our Sponsored Content section? Contact your local rep.

The threads have a 33-degree asymmetrical flank angle (a 22-degree load flank angle and an 11-degree back flank angle). This minimizes the amount of material the threads displace, says Tripp. Flank root support gives stability to the thread in high clamp-load conditions without hindering material flow during thread forming.

It speaks of designers, the likes of Pierre Cardin (who kick-started the Space Age in fashion with his use of tunics, goggles and helmets) and Hardy Amies (who dressed Queen Elizabeth II) – both of whom were commissioned to capture the zeitgeist of the times and have it hemmed into the airline’s uniforms.

Construction of the factory began in 1949. The Sadiq Oil & Allied Mills was inaugurated in 1952 and Khwaja Nazimuddin, the Prime Minister of Pakistan presided over the grand affair. The mill initially processed cotton seed with the aim of providing crude cotton seed oil. The oil was then processed in a refinery. In parallel, the factory began to make vegetable ghee (vanaspati) and in 1952, the first tin of Dalda banaspati rolled off the production line.

When I started working on this story, I was certain that the premise of the article would be that Pakistan’s advertising industry is non-inclusive of women. As I began speaking to women working in advertising agencies, from different disciplines and age groups, to determine if the ad industry in Pakistan is female-friendly, it became evident that my initial perception was erroneous.

The U.S. Environmental Protection Agency (EPA) considers asbestos corrugated sheet to be a Category II, nonfriable material. The material should be abated prior to demolition or renovation. If the material is not damaged, it may be removed by driving the nails through the sheet or cutting off the nail or screw heads. Damaged asbestos sheets, however, are subject to much stricter regulations.

Joints with significant embedment that are regularly serviced. Subsequent bolt installation may have greatly reduced and uneven contact areas, leading to increased potential for fatigue failure due to bolt bending and clamp load loss.

A local Calgary business has been offering plastics recycling to customers across the City for decades. Now, Friendly Earth Environmental is working with autobody shops across the province to recycle plastic car bumpers.