TERRITORY FOCUS: France, featuring Bülte, pgb-Europe & Titanox | Flat Torx Self Drilling Screw

Applying that standard, the court held that the plaintiff’s claims were not conflict preempted because there was no evidence in the record showing that the FAA would not have approved a change to the carburetor’s screws or attachment system. The court noted that Lycoming had previously made changes to the type certificate for this engine, “which the FAA approved in short order.” The court also found that the FAA would likely have approved the plaintiff’s proposed change to the carburetor because Lycoming was previously granted permission by the FAA to remove the requirement that safety wire be used to connect the float bowl and throttle body of the carburetor – the precise alternative design that the plaintiff proposed. In further support of its finding that the FAA likely would have approved the change, the court cited multiple letters sent to Lycoming from the FAA documenting the ongoing issue with leakage between the two parts of the carburetor due to loose screws, the Lycoming service bulletin, which acknowledged the issue with leakage, and letters from Precision Airmotive, LLC detailing the ongoing issues with the screws and recommending that Lycoming evaluate whether a new attachment system should be designed.

With the mainstays of consumer banking (automobiles, electronics, travel and mortgages) again on the uptick, coupled with factors such as a consolidated banking sector with fewer players and the opportunities presented by CPEC, the fundamentals of the Pakistani economy show enough promise to keep banks interested.

angled panels on our roof – 4 months later with a series of heavy rains, our roof leaked in numerous places. They did not use any kind of special bolting system, nor did they coordinate with a roofer. Do you have any suggestions on how we can get this problem fixed before it rains again?

Another option is the ALtracs Plus thread-forming screw from EJOT. The fastener has a unique thread geometry that provides greater shear area between threads, resulting in higher pull-out and strip-out performance.

Friction-drilling screws cannot be installed with just any screwdriver. Because there are additional variables beyond torque and angle to measure and control—driver speed, axial force and fastener depth—friction-drilling screws require sophisticated driving technology and are typically installed with fully automatic equipment. The driver can be mounted to a linear actuator or, more typically, a six-axis robot.

Censorship under the Zia regime had a draconian impact on TV advertising, which was subject to the arbitrary whims and fancies of members in the Censor Board. Three decades later, practitioners Javed Jabbar and Anwar Rammal reflect on those tension-laden years.

- Tri-wing screwdrivers are less common and have three slots radiating out from a triangular hole in the middle.

During an interview with Dawn, Nasir stated that: “From the mid-fifties to the mid-sixties, Radio Pakistan was at the zenith of its success, not only because there was no competitive medium or source of information, education and entertainment, but because it was run in such a perfect manner; it was at par with many international radio services.”

First, removing the shingles allows you to inspect the roof deck and address any questionable areas before encasing the whole thing in foam. Second, you can take the opportunity to make the roof deck airtight. If the sheathing is boards, it’s a good place for a self-adhered membrane; if plywood or OSB, sealing the panel edges with acrylic tape over primer or a fluid-applied membrane would be good options. Third, losing the shingles means eliminating a minor source of three-dimensional air leakage. In other words, the thermal performance will be best if the foam is in direct contact with the sheathing or roof underlayment (depending on assembly). Finally, you’ll have a chance to mark locations of rafters. Any misses with the fasteners used to secure the foam will leave the roof vulnerable to leaking air and possibly water, so getting a look at the nail pattern through the roof sheathing makes life much easier.

The factors contributing to this development are changing consumer behaviour patterns (not least the fact that they are spending more time out of home). There was a time, when during the airing of popular TV dramas, the roads would be relatively empty with people glued to their TV sets. Today, there is no TV show that audiences need to stay at home to watch live; they can watch it on their smartphones or watch the repeat the following day.

We adhere to the principles of the Digital Advertising Alliance’s Self-Regulatory Principles for Online Behavioral Advertising and Multi-Site Data and the Network Advertising Initiative’s Code of Conduct, as applicable. See the Opt-Out section (below) to learn about choices available to you with respect to this type of advertising.

Bourdain was married twice before beginning his relationship with Argento. He became a father at 50 in 2007 when he and his second wife, Ottavia Busia, welcomed daughter Ariane.